July 2018 – embeddedTS Blog

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-4100 computer. We’re going to take a look at how to make our first connections, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-4100 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-4100 with a development kit, including the pre-programmed microSD card and TS-8551 reference board. Right then, let’s get started! Home

Continue reading “Practical Guide to Getting Started with the TS-4100”

This practical guide gives us an opportunity to take a relaxed approach to getting started with the TS-7800-V2 single board computer. We’re going to take a look at how to make our first connections, and setup the network. These are usually the first things we do before starting development. In the grand scheme of things, this is just a friendlier extrapolation from the official TS-7800-V2 manual, so be sure to keep it handy for more advanced topics and specific details. The only assumption being made is that you’ve purchased the TS-7800-V2 with a development kit, including the pre-programmed microSD card and necessary cables. Home

For you TS-7800 users upgrading to the TS-7800-V2, you’re in for a treat. There’s a migration guide specifically created to help you with some of the nuances in upgrading. For this, take a look at the “Migration Path” section of the TS-7800-V2 Manual.

When you’ve finished, be sure take a look at PWM Primer with the TS-7800-V2. Good stuff there about working with dimming LEDs and controlling servo motors.

Right then, let’s get started! Continue reading “Practical Guide to Getting Started with the TS-7800-V2”