Here’s an example program our engineers might find useful. Kris Bahnsen, a long time engineer for Technologic Systems, wrote this simple program to get the voltage input (Vin) on the 8 – 28 VDC power rail on the TS-7670(Rev. D or later) or TS-7400-V2 (Rev. B or later). Without going into too much detail about implementation of the on-board supervisory microcontroller, there is a register which is used to store various ADC values, including Vin. This example program basically polls this 4byte register via I2C interface, accounts for the voltage divider (see TS-7670 schematic or TS-7400-V2 schematic), and outputs the Vin value. Home
So, without further ado, here’s the code:
Continue reading “Getting Current Voltage Input (VIN) on TS-7670 or TS-7400-V2”